GeekMadness

What would you do if you were in the middle of the desert and you needed to access Google Maps or read some email or YM your boss (I said “what if”, just play along.:P ). Just to make matters worse, you haven’t installed the drivers and software of your phone on your Windows box and (gasp!) you didn’t bring along the driver disc! Well, if you were running Ubuntu, this wouldn’t be a problem. Ubuntu Karmic Koala enables you to connect your phone quickly and easily, no drivers needed. I tested this on Karmic Koala with a Sony Ericsson G502, but the steps should be the same for most phones.

Here are the steps to quickly connect your phone to the internet.

Read the rest of this entry »

For a lot of people, one of the first problems they encounter when switching to Ubuntu is that they don’t know how to install stuff. Granted there’s already a lot of stuff pre-installed from a fresh install of Ubuntu, here are some ways of installing programs starting from the easiest.

P.S. Yes I know I said I’ll be posting about iPod and Ubuntu. Don’t worry, we’re getting there.

Read the rest of this entry »

No, I’m not talking about corn-in-a-cup.

Add the countdown for your site

Last night, I upgraded my laptop to Intrepid Ibex, just about a week before the newest version of Ubuntu, Jaunty Jackelope, comes out. Go figure. But before I could perform the upgrade, I was warned that my 7gig root partition on my small 40gig hard drive needed a few more free space. So I was wondering where that free space went; it couldn’t be because I installed the XFCE window manager (which I removed anyway). From Tombuntu, I learned that I could free up more space by removing old unused kernels.

How much free space? I freed 757megs by removing 6 old unused kernels!

Read the rest of this entry »

In line with our celebration of our new wordpress server, here is the second post for the day. In this post, we discuss a video player I’ve been using for over a year, but seems that not enough people are using it. It’s not just any video player. It’s Miro.

Miro Video Player

I know a lot of people who love watching videos at YouTube. And among them, there are also plenty who like downloading their favorite videos. The problem though is that YouTube doesn’t freely provide this service. Instead they have to rely on Firefox extensions, download websites (which are either full of ads, possibly virus-laden, or just plain dubious), and other such hacks.

That was how I found Miro. I’ve been using Miro for about a year now, and it has improved over the past year in terms of both usability and stability. But Miro is more than just another YouTube downloader. Advertised as an Internet TV player, it does what it says and does it well.

Downloading YouTube Videos

Downloading Videos

With Miro’s integrated video search feature, you can search videos from YouTube, Daily Motion, Veoh, and other video websites without starting your browser. You then just choose your search results and Miro will start downloading them into your library. I find this feature really nice, especially when downloading a long or large video, when I want to show something to some friends, or when I’m just too busy to watch them immediately. WIth the video in my library, I can load it up anytime at my convenience, whether I’m on the train or relaxing after cooking/eating dinner.

Internet TV with Miro

Viewing The Contents of a Channel

Miro comes with a few default channels and lets you add more channels. There are plenty of channels to choose from the integrated Miro Guide, which offers you some of its recommendations or you can search for a particular interest. Miro uses the open RSS standard for its channels, so it’s compatible with practically all feeds on the internet, including iTunes podcasts.

The beauty of using channels is that you can set it to auto-download New content or All content to download even old videos you haven’t seen yet. For example, I am subscribed to the WebbAlert channel, which offers an almost-daily 5-minute round-up of what’s new on the Internet and computing in general. When I get home and turn on my computer and Miro, it will automatically download new episode(s) if any, for my viewing pleasure, at my own leisure. It’s like turning on your TV to your favorite daily program, only you’re not bound by stiff schedules.

More Cool Features

Video Playback

Miro’s core functionalities are wonderfully complemented by the options that Miro’s intellgent engineers came up with.

Afraid you’ll run out of disk space? That shouldn’t be a problem when using Miro. You can easily set Miro to make sure to leave a gigabyte or two. And if space is a problem, the expire feature comes in very handy. Some people unfamiliar with this concept might be wary at first, but trust me, you’re not going to be watching last week’s podcast episodes anyway. YouTube videos also expire in the default 6 days, but you can choose to keep a video indefinitely by clicking on the “keep” button. Of course, there’s also a “delete” button, in case you downloaded a loser video or this week’s podcast episode just sucks.

Each channel also displays the number of unwatched videos you have, which conveniently turns into a play button when you move your mouse over it, giving you instant access to unwatched content. There’s also a “New” item in the sidebar. Just like the channels, it displays the number of unwatched videos across all your channels and clicking it plays it. By default Miro is set to play all videos consecutively in a section (be it a channel, New, or your library), but if you prefer watching one at a time (like me), you can turn it off in the options.

Miro is available for GNU/Linux, Mac, as well as Windows. Download it now from http://www.getmiro.com

While you’re downloading Miro, click on over here to read more about how Miro does what it does. And if you’re interested in making your own videos or channels for Miro, http://makeinternettv.org is a good resource for information.

Social Bookmarks:

Breaking Barriers

Do you tire of reformatting your computer so that it can be set up with the prescribed environment determined by your superior or client? How about the hassle of making sure that there is a backup copy of your past project? Is quality assurance testing a pain because you have to reset your environment over and over again?

Well I did tire of that hassle. And I also tired of having to run my computer on a specific OS, just because that was what the task prescribed. So I went out and used a few proven tools to remedy the situation, which will be what this guide will be all about.

Read the rest of this entry »

Are you one of those people who would almost like to switch over to Ubuntu but just couldn’t because you don’t quite like great open source games such as Glest, Sauerbraten and Tremulous? In today’s post, here’s one more reason for you to do so: Now you can play Warcraft III, Frozen Throne, and also Defense of the Ancients, or more commonly known as DOTA! Ok, so that’s 3 reasons…but since DOTA is just a custom map for Frozen Throne maybe 2 and a half…anyway…let’s get started. Read the rest of this entry »

I went to my brother’s wedding last week. During the reception was a slide show of their pictures, coupled with music. It was a great presentation. But what I noticed was that I could do this as well. The music wasn’t attached to the slide show, it was a separately playing live music. And the slide show, which was run on a Mac laptop, was the built-in Mac slide show utility. F-Spot, GThumb, or the image viewer, which are all built into Ubuntu, can do the same thing that that Mac was doing–fading in and out picture after consecutive picture. And with RhythmBox, XMMS, or your favorite media player playing in the background, you got yourself a whole Linux roadshow. Of course, getting great pictures to show is another matter altogether, but a matter out of the scope of this post.

During that trip as well, I visited an old friend that now runs Photo Story Creations, a shop that puts your pictures on mugs, pillows, even tiles, as a mosaic or just a straightforward picture. Imagination’s the limit to what you can do with their products, you just need to tell them what you want to be done with your pictures. Having previously used trialware mosaic programs during my Windows days, I poked around in Synaptics Package Manager to see if I can find a mosaic application for Linux.

Sure enough, there was a fast, little program called Metapixel. It´s actually two small programs: metapixel-prepare and the main metapixel program. The metapixel-prepare program lets you choose a source directory of pictures and a target directory to use as a picture library for metapixel. Creating a mosaic takes around 3 1/2 minutes, which is already comparatively faster to other mosaic programs. But this speed advantage really comes in handy when you´re making mosaics using the library, since only half a minute is used for the actual creation of the mosaic. The other 3 minutes is used for preparing the library, which is a one time deal in this case.

One thing that might turn off some users is that Metapixel is a command-line program. But it’s not really that hard to use. To prepare the library, you use the following command: metapixel-prepare Desktop/sourcepictures Desktop/librarydir Afterwards, just type in
metapixel --metapixel input.jpg output.png --library Desktop/librarydir --cheat=30 The input file is the target image that you want your mosaic will look like and the output is, of course, the final image that will be produced. Notice that I put in a –cheat=30. What that actually does is overlay a 30%-opaque final image on to the mosaic, similar to the flower mosaic above. Unless you have a really vast library of pictures with all possible colors and you’re going to create a pretty big mosaic, this option can come in pretty handy. There are also other options, like the collage option. The difference between a collage and a classic mosaic is that the classic mosaic lays out your pictures in a perfect grid, while pictures in a collage can overlap each other.

Another cool tool that should be in the toolbox of the Linux photographer is Hugin Panorama Photo Stitcher. It features tools for correcting perspective, and of course, stitching tools for creating panoramas.

To stitch photos, all you need to do is create points in your pictures to help the program automatically stitch your photos. In the example above, Hugin automatically adjusted for the perspective distortion effect of my camera, stitching three photos seamlessly. You may also want to check out the official Hugin stitching online tutorial.

Social Bookmarks:

If you’ve ever bought a laptop or a branded desktop, the first thing that you’ll see from the Windows installed is a welcome screen, which offers to guide you in setting up your system, asking you such questions as what user name you prefer and some network information.

I had downloaded an Alternative Install Ubuntu Edgy and burned it to CD, because one of my computers had really low memory, thus making use of the graphical install utility was a nightmare, so I used the Alternative Install disc for the old ASCII-interface installer. But only quite recently did I try the OEM install option that came with the CD, just out of curiosity. It’s basically the same as the ASCII installer, with the exception that instead of prompting you for the desired username, it provides an oem account and you are just prompted for the password. After installation and reboot, you log on to your system using the oem account as you would a normal install.

From here, you can configure your system as you please; install all available updates, configure the repositories, install multimedia codecs, and if you’re a computer company, set the desktop background to your company logo.

When you feel that your system is ready for the end user, open up a terminal and type sudo oem-config-prepare. On next reboot, which the end user will be doing, he or she will be prompted for a new user name, keyboard layout, etc. Voila!

WARNING: As pointed out by Chrys, the OEM account is not supposed to be used as a regular account as it is only meant to perform a few preparations before use for the end-user. After oem-prepare-config is executed, the oem user, and its associated home folder, will disappear by next reboot.

Of course this isn’t anything new, but since no one I know knows about this (relatively few know about the Windows OEMs either), might as well put out more information for everyone’s perusal.

And since Dell is starting offering Ubuntu on some of their models, it would be advantageous to other retailers and computer manufacturers to start giving their customers a choice, instead of just assuming they want to pay for a Windows bundle.

Social Bookmarks:

I know this is an old idea and it’s been done several times over, but what would be a cool tech blog without my own tutorial on this? We’ll be making a server that you can connect to from just about anywhere.

Setting Up the Server

Fire up Synaptic Package Manager and search for “ssh”, or if you prefer faster way and willing to get your hands dirty, open up a terminal window and type: sudo apt-get install ssh

After installing SSH, we need to put it in just enough security to help us sleep more soundly at night. Configure SSH by typing: sudo vi /etc/ssh/sshd_config
Look for the following lines and set their options as so:
PermitRootLogin no
PermitEmptyPasswords no
ChallengeResponseNotification no
PasswordAuthentication no

Ok, we have to restart SSH for these settings to take effect. Type in: sudo /etc/init.d/ssh restart

At this point, you can already connect to your computer from another computer. Just type in the remote computer (for Linux computers) ssh user@domain.com OR user@192.168.0.5

(for Windows computers) Install Putty and use that to connect.

You should try it out at this point to get yourself familiar with the login process.

User corresponds to one of the server’s users, including root. Although, we already disabled root login.

Next, we setup Remote Desktop. System > Administration > Remote DesktopCheck “Allow other users to view your desktop” and “Allow other users to control your desktop” Uncheck “Ask for confirmation” and check “Require password” and set a nice, secure password (You could also opt to uncheck this as well, since you’ll be tunneling VNC through SSH).

Setting up the Client Computer

For Windows, install Putty or your favorite SSH client.

For Linux, if it’s not already installed, search for SSH in Synaptics or type sudo apt-get install ssh

Also, install your favorite VNC client, such as WinVNC or TightVNC. (This is not necessary for Linux computers since it is usually built in).

Next up, we set up Putty for tunneling. We don’t need to set anything in Linux and shortly you’ll know why.

1. Start up putty.
2. Expand “Connection”
3. Expand “SSH”
4. Go to Tunnels
5. Enter the source port you’ll be using
6. Enter <destination address>:<destination port>

Source port is the port number for your client machine (the one you’re using to connect). You can set this to any port available at your disposal. Notice here one of the tunnels L8080 helium.kicks-ass.org:5900 I used 8080 as the source port since the other ports were being blocked by our corporate firewall.

Destination port is the port number for your server machine (the one you want to connect to). The default port for VNC is 5900, so we’ll use that.

Go back to “Session” menu and type in a name in “Saved Sessions” and click on Save, unless you want to set your Putty everytime you run it.

Finally, Connecting

1. Ok, the Windows method first. Start up Putty, click on your saved session, then click Open.
2. Login to the server.
3. Fire up VNC

4. You’ll be shown a dialog box, enter your destination IP or domain and port with the format <destination IP>:<display>:<port> Since we’ll be using the default display, we can just omit that but we still have to leave the colons behind. Click OK

5. If you set a password in the Remote Desktop settings, you’ll need to enter that next, as well.

That’s it. Now for the Linux way.

1. Connect to SSH sudo ssh -L 8080:domain.com:5900 user@domain.com
2. Connect to VNC vncviewer domain.com -listen 8080

Done.

Don’t forget to open up the SSH port (22 by default) in your router/firewall as well.

Dynapic IP Address

Not all of us are so lucky to have their own domain name or a permanent IP address. Usually, the Internet service you get from your provider automatically assigns you an IP address, and that address rotates from time to time, like in the case of PLDT MyDSL. So if you’re far away from home, how do you determine what your home’s IP address is? You can get a free host name to alias your dynamic IP by registering one in www.dyndns.org or other dynamic IP host name providers.

Transferring Files Between Computers

In Windows, just install WinSCP, enter the IP or domain of your server as well as the password, and you’re good to go.

For Linux users, type in scp -r folderOrFile user@192.168.0.5:/home/user/

To transfer files from your server, just interchange the parameters.

Using just these, you can have Azureus or your favorite Bittorrent client, set it so that it checks for new torrents now and then, and just SCP the torrent files into your server.

We’re Done Here

So there you have it, a basic remote-controlled computer. It’s up to you, though, to beef up the security as you see fit, or add other applications or features to this set up. Enjoy!

Social Bookmarks: